Black plate (21,1)
!
For iPod with Lightning connector
users who use a USB interface cable for
iPod / iPhone
Lightning to 30-pin Adapter
USB interface cable for iPod / iPhone
!
For iPod with Lightning connector
users who use an HDMI/USB interface
cable for iPod / iPhone
Lightning Digital AV Adapter
HDMI/USB interface
cable for iPod /
iPhone
Lightning to USB
cable
Disconnecting your iPod
%
Pull out the cables after confirming
that no data is being accessed.
Plugging and unplugging a
USB storage device
CAUTION
!
To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!
Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, iPhone, smartphone, or other devices
while using this product.
p
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p
Connection via a USB hub is not possible.
p
A USB interface cable for iPod / iPhone
(sold separately) is required for connection.
iPod with Lightning connector users can
also connect a USB storage device to this
navigation system by plugging it into the
USB port of the other separately sold cable.
Plugging in a USB storage device
1
Pull out the plug from the USB port of
the USB interface cable for iPod / iPhone.
<CRB4228-A>21
Engb
21
Chapter
02
Basic
operation
Basic operation