Black plate (15,1)
!
Do not operate this product until the LCD
panel has completely opened or closed. If this
product is operated while the LCD panel is
opening or closing, the LCD panel may stop at
that angle for safety.
!
Do not place a glass or can on the open LCD
panel. Doing so may break this product.
Adjusting the LCD panel angle
F70BT
1
Press the
h
button.
The following screen appears.
2
Touch the following keys to adjust the
angle of the LCD panel.
Laying the panel down.
Returning the panel to the upright
position.
3
Touch the following key.
Returns to the previous screen.
p
The adjusted angle of the LCD panel will be
memorised and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting/ejecting/
connecting media
CAUTION
!
Do not insert anything other than a disc into
the disc-loading slot.
!
Do not insert anything other than SD memory
cards into the SD card slot.
!
Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
!
Do not press the
h
button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
!
Do not press the
h
button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
Inserting and ejecting a disc
Inserting a disc
F70BT
1
Press the
h
button.
The following screen appears.
2
Touch the following key.
Opens the LCD panel.
3
Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc
F70BT
1
Press the
h
button.
The following screen appears.
<CRB4523-A>15
Engb
15
Chapter
02
Basic
operation
Basic operation