Pioneer AVH-Z1090DVD, Руководство пользователя

Страница: 51 / 68

51
En
En
g
lis
h
Important
The speaker leads are not used when this
connection is in use.
Important
Front speaker and Rear speaker signals
(STD) or middle range speaker and high
range speaker signals (NW) are output
from the speaker leads when this
connection is in use.
System remote control
Connect to Blue/white cable.
Power amp (sold separately)
Connect with RCA cable (sold
separately)
To Rear output (STD)
To middle range output (NW)
Rear speaker (STD)
Middle range speaker (NW)
To Front output (STD)
To high range output (NW)
Front speaker (STD)
High range speaker (NW)
To subwoofer output (STD)
To low range output (NW)
Subwoofer (STD)
Low range speaker (NW)
NOTE
Select the appropriate speaker mode
between standard mode (STD) and
network mode (NW). For details, refer to
Starting up the unit (page 8).
NOTES
• For details on how to connect an external
device using a separately sold cable, refer
to the manual for the cable.
• For details concerning the connection,
operations and compatibility of iPhone,
refer to iPod/iPhone or smartphone
connection for AV source (page 18).
• For details concerning the connection
and operations of smartphone, refer to
iPod/iPhone or smartphone connection
for AV source (page 18).
Power amp (sold
separately)
Without internal amp
With internal amp
iPod/iPhone and
smartphone
USB port
USB cable 1.5 m
USB interface cable for iPod/iPhone (CD-
IU52) (sold separately)
iPhone with Lightning connector
USB port
USB cable 1.5 m
USB interface cable for iPod/iPhone (CD-
IU51) (sold separately)
iPhone with 30-pin connector
USB port
USB cable 1.5 m
USB - micro USB cable (Type USB A -
micro USB B) (supplied with CD-MU200
(sold separately))
USB Type-C cable (Type USB A - USB C)
(supplied with CD-CU50 (sold
separately))
Smartphone
NOTE
The length of Type USB A - micro USB B
cable cannot exceed 2 m and Type USB A -
USB C cannot exceed 4 m according to the
USB cable standard. When using a cable
other than the above conditions, the main
unit function may not operate properly.
About rear view camera
When you use the rear view camera, the
rear view image is automatically switched
from the video by moving the gearstick to
REVERSE (R) . Camera View mode also
allows you to check what is behind you
while driving.
iPod/iPhone with
Lightning connector
Connecting via the USB port
iPhone with 30-pin
connector
Connecting via the USB port
Smartphone
(Android device)
Connecting via the USB port
Camera