Pioneer AVH-X6500DVD, Руководство пользователя

Страница: 37 / 196

When the car
’
s interior acoustic characteristics
cannot be measured correctly, an error message
will be displayed. (Refer to
Understanding auto
EQ error messages on page 52.)
#
It takes about nine minutes for auto EQ measure-
ment to be completed when all the speakers are con-
nected.
#
To stop auto EQ, touch Stop .
10 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sunlight
for an extended period, high temperatures may
cause distortion, color change or malfunction.
Setting the video signal
When you connect this unit to an AV equipment
to this unit, select the suitable video signal set-
ting.
!
As this function is initially set to Auto , the
unit will automatically adjust the video signal
setting.
!
You can operate this function only for the
video signal input into the AV input.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting
items are displayed.
!
AV
–
Adjusts the AV video signal
!
AUX
–
Adjusts the AUX video signal
!
Camera
–
Adjusts the rear view camera video
signal
4 Touch
c
or
d
to select the desired video
signal appears.
Auto
—
PAL
—
NTSC
—
PAL-M
—
PAL-N
—
SECAM
Using the Favorite menu
1 Display menu columns to register.
Refer to Menu operations on page 29.
#
You can customize menus except Video Setup
menu.
2 Touch the star icon in the menu column
for the desired menu to register the menu.
The star icon for the selected menu is filled in.
#
To cancel the registration, touch the star icon in
the menu column again.
3 Display the favorite menu and choose a
registered menu.
Refer to Menu operations on page 29.
Note
You can register up to 12 columns.
English
System settings
37
Section
Favorite menu
En
18
19
<CRD4711-A/N>37