Introduction of setup
adjustments
1
1
Setup menu display
Shows the setup function names.
%
Touch A.MENU and then touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
#
When
A.MENU
is not displayed, you can dis
play it by touching the screen.
#
You can also display
MENU
by clicking the
joystick.
#
To go to the next group of function names,
touch
NEXT
.
#
To return to the previous group of function
names, touch
PREV
.
#
To return to the previous display, touch
BACK
.
#
To return to the display of each source, touch
ESC
.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re
turned to the source display.
Setting the video input
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con
nected component as
AV
source.
!
Select
M-DVD
to watch video of a con
nected DVD player as
S-DVD
source.
1 Touch A.MENU and SETUP and then
touch AV INPUT.
2 Touch any of the following touch panel
keys to select the video input setting.
!
OFF
No video component is connected
!
VIDEO
External video component
!
M-DVD
DVD player connected with RCA
cable
#
When a DVD player is connected with an AV
BUS cable, do not select
M-DVD
otherwise no
picture will be displayed even if you select
S-DVD
.
Setting for rear view camera
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video (
BACK
UP CAMERA IN
jack) when a rear view cam
era is installed on your vehicle. When the gear
shift is in
REVERSE (R)
position, the video
automatically switches to a rear view camera
video. (For more details, consult your dealer.)
!
Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to
RE-
VERSE (R)
from another position.
!
When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
!
To return to the source display, press
MENU
.
Other Functions
En
92
Section
18