manualshive.com logo in svg

Pioneer AVH-P5750DVD, Руководство по обслуживанию, Страница: 2 / 212

Поделиться
Скачать
Pioneer AVH-P5750DVD Скачать руководство пользователя страница 2

 

AVH-P5750DVD/RC

2

1

2

3

4

1

2

3

4

C

D

F

A

B

E

 

SAFETY INFORMATION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.

RC, RI

1. Safety Precautions for those who Service this Unit.

• Follow the adjustment steps in the service manual when servicing this unit. When checking or adjusting the emitting

power of the laser diode exercise caution in order to get safe, reliable results.

Caution: 

1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.

2. The triangular label is attached to the mechanism

unit frame.

CLASS 1
LASER PRODUCT

Содержание AVH-P5750DVD





















































































































































































































Отзывы:

Нет отзывов