!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other
pointed instrument.
RESET
button
(AVH-P4200DVD)
RESET
button
(AVH-3200DVD/AVH-
3200BT)
Note
Switch your engine ON or set the ignition switch
to ACC ON before pressing
RESET
in the follow-
ing situations:
!
After completing connections
!
When erasing all stored settings
!
When resetting the unit to its initial (factory)
settings
Feature demo mode
The feature demo automatically starts when
you select
Source Off
for the source and con-
tinues while the ignition switch is set to ACC
or ON. To cancel the feature demo, press and
hold
MUTE
. Press and hold
MUTE
again to re-
start. Operating the feature demo while the
car engine is turned off it may drain the bat-
tery power.
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel. Refer to
the response positions of the touch panels
(Touch Panel Calibration)
En
7
Section
02
Before
Y
ou
Start
Before You Start
Содержание AVH-3200BT
Страница 1: ...Operation Manual DVD RDS AV RECEIVER AVH P4200DVD AVH 3200DVD AVH 3200BT English ...
Страница 95: ...En 95 ...