If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Special Device to select the spe-
cial device.
#
Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
3
Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
#
If three devices are already paired,
Memory Full
is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to the previous page.
4
Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting,
Pair your phone
is dis-
played. If the connection is established,
Paired
is displayed.
#
If the connection fails,
Error
is displayed. In
such cases, try again from the beginning.
#
You may also need to enter a PIN code into
this unit. If your telephone requires a PIN code to
establish a connection, look for the code on the
telephone or in its accompanying documenta-
tion.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to
Connecting to a Bluetooth
device automatically
(Function of AVH-P4490BT/AVH-2490BT)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Auto Connect to turn automatic
connection on.
If your Bluetooth device is ready for a
Bluetooth wireless connection, a connection
to this unit will automatically be established.
#
To turn automatic connection off, touch
Auto Connect
again.
If connection fails,
“
Auto connection failed.
Retry?
”
appears. Touch
Yes
to reconnect.
3
Once you turn your vehicle
’
s ACC
switch on again, a connection is estab-
lished automatically.
Switching visible unit
(Function of AVH-P4490BT/AVH-2490BT)
This function sets whether or not to make this
unit visible to the other device.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Visibility to select visibility off.
#
To turn visibility on, touch
Visibility
again.
Displaying Bluetooth Device
address
(Function of AVH-P4490BT/AVH-2490BT)
<CRB3743-A/N>71
En
71
Section
12
Menu
operations
Menu operations