Installation
03
Section
16
Engb
Installation with the holder and
side bracket
1 Install the holder into the dashboard.
After inserting the holder into the dash-
board, select and bend the tabs appropriate
to the thickness of the dashboard material.
(Install this product as firmly as possible
using the top and bottom tabs. To secure
this product, bend the tabs 90 degrees.)
Dashboard
Holder
2 Install this product into the holder.
Dashboard
3 Attach the trim ring.
Trim ring
Removing the unit
1 Remove the trim ring.
Releasing the front panel allows easier
access to the trim ring.
Trim ring
2 Insert the supplied extraction keys
into both sides of the unit until they click
into place.
Содержание AppRadio SPH-DA100
Страница 142: ...142 Ru ...
Страница 143: ...143 Ru Русский ...