66
Loop
Using a loop
Setting a loop automatically
1 Press the [AUTO LOOP] button during playback.
Loop playback starts from the position where the button is pressed.
Setting a loop manually
1 Press the [SHIFT] and [1/2X] buttons at the point where you
want to start the loop (loop-in point) during playback.
2 Press the [SHIFT] and [2X] buttons at the point where you
want the loop to end (loop-out point).
Loop playback of the specified section starts.
Halving the length of a loop
1 Press the [1/2X] button during loop playback.
The loop length is halved each time you press the button.
Doubling the length of a loop
1 Press the [2X] button during loop playback.
The loop length is doubled each time you press the button.
