14
En
Using DVS
Digital music files on a computer can be played by connecting the computer
1
and an analog player (or DJ player) to this unit and then playing a
control disc
2
with the analog player (or DJ player).
1
Install rekordbox DVS on your computer beforehand.
2
A special record or CD containing the signals necessary for operating digital music files.
About the settings of rekordbox dvs
For the settings of rekordbox dvs to use the DVS system, refer to
rekordbox dvs Setup Guide
on the following web site.
rekordbox.com/en/support/manual.php
Setting DVS with rekordbox
Performing the following setting on rekordbox (PERFORMANCE mode)
of [
Preferences
] > [
DVS
].
1 Enable/Disable the DVS function.
2 Set the control signal.
1
2
About [Enable DVS Function]
When putting a check mark in [
Enable DVS Function
], each DECK
switches the DVS mode.
There are four kinds of DVS modes ABSOLUTE, RELATIVE, INTERNAL,
THROUGH.
Click the DECK number
to select the mode from the menu.
When selecting the mode, the selected mode name (
)
appears under the DECK number.
The mode name lights up when receiving the control signal from the
turn table (or CDJ, XDJ).
When receiving the control signal:
When receiving no control signal:
: ABSOLUTE mode
!
Location of the needle on the turn table is linked with the
playback position of rekordbox DECK.
: RELATIVE mode
!
Location of the needle on the turn table is not linked with the
playback position of rekordbox DECK.
: INTERNAL mode
!
Location of the needle, playback direction, tempo, and Vinyl
operation on the turn table are not linked to the playback of
DECK.
: THROUGH mode
!
The playback sound of the turn table is output as it is.
