PIONEER DJ PLX-500, Руководство по эксплуатации

Страница: 12 / 132

En
12
Connections
! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Refer to the operating instructions for the component to be connected.
! Connect the power cord after all the connections between devices have been completed.
Connecting to powered speakers
Powered speakers
Audio cable
Rear panel
2
3
Power cord
To power outlet
1
1 Set the [PHONO/LINE] switch to [LINE].
2 Connect the audio cable to the [LINE] input terminal of the powered speakers, etc.
!
If necessary, use the included audio adapter cable.
3 Connect the power cord.
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the
power cord.
Connecting to a pre-main amplifier and component
Pre-main amplifier, component, etc.
Audio cable
Rear panel
Power cord
2
3
1
To power outlet
1 Set the [PHONO/LINE] switch to [PHONO].
2 Connect the audio cable to the [PHONO] input terminal of the pre-main amplifier or other component.
! If this product is connected to a pre-main amplifier or component that does not have a [
PHONO
] terminal, sufficient volume and sound quality
cannot be obtained. In that case, set the [ PHONO/LINE ] switch of this unit to [ LINE ] and then connect this unit to the [ LINE ] input terminal of the
pre-main amplifier or component or use a phono equalizer.
3 Connect the power cord.
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the
power cord.