Pinnacle Systems Lightning 1000, Руководство по установке, Страница: 20 / 46

14
Lightning 1000 Installation Guide
monitor the user interface in composite format (typically at
distances greater than five meters from the chassis).
5. SVGA Menu Output. One 15-pin “D” connector is provided for
the system’s SVGA display menu output. Use this menu output for
the maximum video quality. The Y/C and Composite outputs are
only available at resolutions less than 800 x 600.
Note
The SVGA output provides a much higher quality output than the Y/C
output or Composite output. Use the SVGA output whenever possible.
6. RS-422 Ports. Four 9-pin “D” connectors are provided for connect-
ing Lightning to control devices and automation control. RS-422-
A and RS-422-B are designed for connection to optional ShotBox
controllers. RS-422-C and RS-422-D connectors are provided for
connecting Lightning to automation systems for control.
7. Channel 3 Input/Output. This capability is optional on a Lightning
system. Two CCIR-601 inputs (Video and Key) and two CCIR-601
outputs (Video and Key) are provided with the option. If the
channel is not installed, a blank panel is provided.
8. Channel 2 Input/Output. This capability is optional on a Lightning
system. Two CCIR-601 inputs (Video and Key) and two CCIR-601
outputs (Video and Key) are provided with the option. If the
channel is not installed, a blank panel is provided.
9. Digital Video Output*. One BNC connector is provided on each
installed Channel for a CCIR-601 Digital Video Output. Connect
the output to the video input of a destination CCIR-601 device
such as a digital video routing switcher or monitor.
10. Channel 1 Input/Output. Channel 1 Input/Output capability is
standard on a Lightning system. Two CCIR-601 inputs (Video and
Key) and two CCIR-601 outputs (Video and Key) are provided.
11. Digital Key Output*. For all installed channels, one BNC connec-
tor is provided for a CCIR-601 Digital Key Output. Connect the
output to the key input of a destination CCIR-601 device such as a
digital video routing switcher.
12. Rear Connector Panel. The Rear Connector Panel is hinged at the
bottom. It drops down to provide access to internal connectors on
the backplane.
13. AC Power In. The AC Line cord connects here to provide chassis
power.