INSTALLATION INSTRUCTIONS:
USER MANUAL CL-SML2ST 1000 LUMEN DUAL HEAD SOLAR MOTION ACTIVATED SECURITY LIGHT
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
1 x Rechargeable Battery
2 x Mounting Screws
2 x Wall Anchors
(Included Inside Product)
1
Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
1 x Motion Light
WARNING:
- Your motion light is not a toy. Keep it out of reach from small children.
- Your motion light must be installed outdoors. Direct sunlight is needed for light to operate
properly.
- If using a step ladder, you may require a second person to help install the solar motion light.
- Prior to installation, lay out all components and check against the part list section in this manual.
- Never look directly into the solar motion light when illuminated.
- This product is designed for outdoor use.
PRE-INSTALLATION
1. Before assembly compare package contents with list to make sure all
parts are present.
2. Select suitable location that can support the weight of the fixture.
Determine mounting method (page 2).
HARDWARE
BATTERY REPLACEMENT INSTRUCTIONS
When replacing the battery, be sure to:
• Use rechargeable battery only. Battery specification is Li-ion 3.7V 1800 mAh, 1pc is required.
• Match the replacement battery specifications with the battery that have been removed.
• Observe the correct polarity (+ and -) when installing the replacement battery.
• IMPORTANT: Dispose of the Lithium ion battery in accordance with local, state and federal regulations.
CARE & MAINTENANCE
• The solar motion light should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal
performance and battery charging.
• Never let any abrasive material come into contact with the light.
• Your fixture is made from quality materials that will last many years with minimal care.
Before beginning installation of the product, make sure all
parts are present. Compare parts with package contents
list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes per light.
