Fan SHIM for Raspberry Pi
PIM461
Make your Raspberry Pi 4
seriously
cool with Fan SHIM! This
30mm no-solder, controllable CPU fan with RGB LED and
tactile switch will give your Raspberry Pi significantly better
thermal performance. It's whisper-quiet too!
Fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it's ready to go, no
soldering required! Note that, due to the height of the fan, if you want to use HATs or pHATs
with Fan SHIM, then you'll need to use a
booster header
.
