Pima TD-600/SAT-6, Руководство по установке, Страница: 4 / 12

TD-600/SAT-6 Installation Guide
4
The SAT-6 module
Figure 1. The SAT-6 diagram
No.
Terminal/
Connector
Description
1
(+)/(-) Power supply for PIR/ultrasonic/etc., detectors
2
Z1-Z6 6 inputs for dry contact detectors & (-) terminal
3
KEYPAD A Molex connector for quick connection of the technician keypad
4
EGND
 Earth Ground terminal. Can be used in areas of severe electrical
activity (abnormal levels of lightning or electrical discharge).
 When using PIMA’s integrated transformer, earth ground is not
required. Only when using external transformer and lightning
conditions are severe, the EGND terminal can be used.
 Connect the terminal to earth grounds, such as metal cold water
pipe or AC power outlet ground
5
Transmitter
A connector to the TRV/TRU-100 long range radio transmitters and the
GSM-200 cellular module
6
Backup
Battery wires
 Red: (+)
 Black : (-)
7
AC
 14-16 VAC Voltage input
 The cross-section area of the AC cable must be at least 0.75mm 2