1
net4pro-i is a PIMA XPort
®
based Network Interface Card for connecting the Hunter-Pro
series (832/896/8144) to CMS (Central Monitoring Station) via LAN/WAN. It carries a static
IP number, which can only be programmed through PIMA’s software, Comax, and it is
programmed with a dedicted cable (p/n 3411079) that is not included in the package.
W
HAT
’
S
IN
THE
PACKAGE
?
The package contains the net4pro-i, mounted on a metal plate, and a 4-wire serial cable for
connecting the unit to the control panel.
I
NSTALLATION
The net4pro-i is supplied ready to be attached inside the control panel case. Before installing
it, make sure it is not connected to power!
1. Unscrew the upper-right control panel’s PCB screw, attach the net4pro-i metal plate to
the case and screw the plate to the PCB (see the images below)
2. Connect the 4-wire cable between the net4pro-i and the PCB SERIAL connector
3. Connect the net4pro-i to the LAN/WAN using a network cable
net4pro-i
Installation & Programming Guide
PIMA Electronic Systems Ltd.
P/N 4410272 A1, XX en (June 2009)