GSM-200 Installation Guide
5
Installing the GSM-200 along the TRV/
TRU-100 Radio transmitters
Use the following figure to install the GSM-200 communicator and the TRV/TRU-100 long-range
radio transmitters in the same control panel’s designated metal box (P/N 4210111) top side.
There are two mounting options for the GSM-200: middle side (front view) when the
communicator is installed alone; on the right side when installed along the TRV/TRU-100 radio
transmitters. See the next figures.
Note that special adapters (P/N 4210115 for the GSM-200; P/N 4210114 for the TRV/TRU-100)
and a designated harness (P/N 3411058) must be used to install the two modules.
Figure 4.
Mounting options (top view)
Figure 5.
The GSM-200 installed alone in the control panel box
The antennas of both modules must be connected with coaxial
cables and be installed at least 1 meter away from each other.
Grounding should be connected directly to the TRV/TRU-100.
Figure 6.
The GSM-200 and the TRV/TRU-100 installed together
GSM-200
GSM-200
TRV/
TRU-100
TRV/TRU-100
TRANSMITTER
socket
Control panel
GSM-200
2 module harness
