16
PSSnet SLL
Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany
X
Autopolarity
X
Autocrossing
X
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
X
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
100 Mbit/s F/O connection PSSnet SLL...F...
For the device variants PSSnet SLL...F...SC, these ports are SC connec-
tors.
100 MBit/s F/O ports enable the connection of terminal devices or inde-
pendent network segments in compliance with the IEEE 802.3 100BASE-
FX standard.
These ports support:
X
Full duplex mode
Note:
Make sure that the SM ports are only connected with SM ports, and
MM ports only with MM ports.
2.2
Display elements
2.2.1
Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
Figure 5: Device status LEDs
1 – Power LED (P)
Figure
Pin
Function
1+2
One line pair
3+6
One line pair
4,5,7,8
Not used
Table 3: Pin assignment of a TP/TX interface in MDI-X mode, RJ45 socket
8
7
6
5
4
3
2
1
