PSEN cs4.1n
Operating Manual PSEN cs4.1n
22180-EN-05
12
Connection to evaluation devices
Make sure that the selected evaluation device has the following property:
}
OSSD signals are evaluated through 2 channels with feasibility monitoring
Please note:
}
Connection diagram, single connection
Actuator
Receiver
Evaluation device
Suitable Pilz evaluation devices are, for example:
}
PNOZelog for safety gate monitoring
}
PNOZpower for safety gate monitoring
}
PNOZsigma for safety gate monitoring
}
PNOZ X for safety gate monitoring
}
PNOZmulti for safety gate monitoring
Configure the switch in the PNOZmulti Configurator with switch type 3.
}
PSS for safety gate monitoring with standard function block SB064, SB066 or
FS_Safety Gate
}
PSSuniversal PLC for safety gate monitoring with function block FS_SafetyGate
The correct connection to the respective evaluation device is described in the operating
manual for the evaluation device. Make sure that the connection is made in accordance
with the specifications in the operating manual for the selected evaluation device.
