PNOZ XV3.3P
Operating Manual PNOZ XV3.3P
20777-EN-09
| 21
Safety characteristic data
NOTICE
You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.
Operating
mode
EN ISO 13849-1:
2015
PL
EN ISO 13849-1:
2015
Category
EN 62061
SIL CL
EN 62061
PFH
D
[1/h]
EN ISO 13849-1:
2015
T
M
[year]
Safety contacts,
instantaneous
PL e
Cat. 4
SIL CL 3
2,31E-09
20
Safety contacts,
delayed <30 s
PL d
Cat. 3
SIL CL 3
2,64E-09
20
Safety contacts,
delayed ≥30 s
PL c
Cat. 1
SIL CL 1
2,87E-09
20
Explanatory notes for the safety-related characteristic data:
}
The SIL CL value in accordance with EN 62061 corresponds to the SIL value in accord-
ance with EN 61508.
}
T
M
is the maximum mission time in accordance with EN ISO 13849-1. The value also ap-
plies as the retest interval in accordance with EN 61508-6 and IEC 61511 and as the
proof test interval and mission time in accordance with EN 62061.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are
not
identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.
Supplementary data
CAUTION!
It is essential to consider the relay's service life graphs. The relay outputs'
safety-related characteristic data is only valid if the values in the service life
graphs are met.
The PFH value depends on the switch frequency and the load of the relay output.
If the service life graphs are not accessible, the stated PFH value can be used irrespective
of the switch frequency and the load, as the PFH value already considers the relay's B10d
value as well as the failure rates of the other components.
