manualshive.com logo in svg

Pilz 6D000020, Руководство по эксплуатации, Страница: 81 / 106

Поделиться
Скачать
Pilz 6D000020 Скачать руководство пользователя страница 81

Operation

Operating Manual PSEN sc M 3/5 series
1005055-EN-02

| 81

Message in the display 

Error/cause

Description/measure

Icon

Text

INTF18

An error occurred during the system
test.

Perform a 

reset of the safety laser

scanner [

 85]

.

If the error persists, please contact
Pilz.

INTF20

An error occurred during the system
test.

Perform a 

reset of the safety laser

scanner [

 85]

.

If the error persists, please contact
Pilz.

OSSD1F3

Earth fault has occurred on OSSD1.

Check the EDM state and the 

wiring

of the OSSDs [

 48]

.

If the error persists, please contact
Pilz.

OSSDF1

An error has occurred when testing
the OSSD1.

Check the EDM state and the 

wiring

of the OSSDs [

 48]

.

If the error persists, please contact
Pilz.

10.3.2

Warnings

Message in the display 

Error/cause

Description/measure

Icon

Text

BOOTF

An error has occurred when starting
the system.

Perform a 

reset of the safety laser

scanner [

 85]

.

If the error persists, please contact
Pilz.

INTF6

An error occurred during the system
test.

Perform a 

reset of the safety laser

scanner [

 85]

.

If the error persists, please contact
Pilz.

EXTTEMP

The ambient temperature is outside
the temperature range indicated in
the 

Technical details [

 91]

.

Ensure that the ambient temperature
is in the temperature range specified
in the 

Technical details [

 91]

.

OVERTEMP

The ambient temperature is outside
the temperature range indicated in
the 

Technical details [

 91]

.

Ensure that the ambient temperature
is in the temperature range specified
in the 

Technical details [

 91]

.

HIGH REFL-
BKG

The reflection of the background is
too strong.

Reduce the background reflection or
increase the safety distance (see

Distance to intense light sources and
to reflective surfaces [

 37]

).

Содержание 6D000020











































































































Отзывы:

Нет отзывов