PSEN cs5.1 M12/8
Operating Manual PSEN cs5.1 M12/8
1003419-EN-06
28
[4]
[1]
[3]
[2]
Fig.: Applying the screw covers [1] and [3] on the actuator
WARNING!
Loss of safety function due to non-permitted enlargement of the assured re-
lease distance when using both switching lobes (aligned at semicircle mark-
ing)
Depending on the application, serious injury or death may result.
– Install a mechanical stop when using the response range at the semi-
circle marking, to avoid unintended switching off at the limit of the re-
sponse range and to prevent the maximum release distance from en-
larging impermissibly by using both switching lobes.
[7]
[1]
[2]
[3]
[6]
[9]
[10]
[10]
[5]
8
4
0
-4
-8
-12
-16
-20
-24
-28
12 8 4 0
8
4
0
-4
-8
-12
-16
-20
-24
-28
[5]
12
8
4
0
9,5
9,5
8
8
[8]
[4]
9,5
9,5
[11]
[12]
[4]
-6,4
-6,4
Legend
[1] Hysteresis
[2] Typical operating distance S
O
[3] Typical release distance S
r
[4] Offset in mm (distance of the middle of the actuator to the zero line in the grid)
[5] Operating distance in mm
[6] Response range
[7] Connector on the sensor
[8] Limit of response range, position of gate hinge
[9] Status of LED
