Pilz 540132, Руководство по эксплуатации, Страница: 16 / 24

SDD ES PROFIBUS
Operating Manual SDD ES PROFIBUS
1003825-EN-06
| 16
Menu structure
The LC display has a max. five lines.
It displays information and navigates the menu.
The status of the supply voltage is displayed in the first line, followed by 4 lines containing
the menu levels.
Menu Description
Settings
Information about I/O mapping on the connected
safety devices and about the network configuration
of the SDD ES PROFIBUS
Device History
Information about previous changes of state (en-
ables and guard locking) of a connected safety
device and status information
Device Info
Information about the connected safety devices
Device Event
Message on the change of state of a safety device
Menu settings
GPIO-Mapping
Value range Meaning
PLC Value is set by control system
1-16 1-16 represents a connected safety device. If the
actuator enable is set for this safety device, the
GPIO is set to 24 V.
If the value ≠ PLC, the control system has no ac-
cess to the input/output channel.
Profibus Conf.
Option Value range Meaning
SSA
On / Off SSA status (status when delivered = On)
When SSA = On, the Node-ID is assigned by the
PROFIBUS-DP Master
Locked SSA Lock Telegram set by PROFIBUS-DP Master.
As a result, this station is locked for telegrams. The
lock can be cancelled by setting another SSA value
via the multifunction switch.
Node ID
1-125 Display or change the set Node-ID
Restart
Trigger a restart of the SDD ES PROFIBUS in order
to adopt the amended node configuration settings.