SDD ES PROFIBUS
Operating Manual SDD ES PROFIBUS
1003825-EN-06
| 13
Setting the station address
The station address of the SDD ES PROFIBUS is set on the display with the multifunction
switch.
1. Press the multifunction switch to change to the menu
Settings -> Profibus Config
.
2. Make sure that SSA = ON is selected.
3. Switch to the
Restart
menu and press the multifunction switch to confirm the restart of
the SDD ES PROFIBUS
System structure
PROFIBUS-DP
Slave 1
PROFIBUS-DP
Slave 2
PROFIBUS-DP
Slave 3
PROFIBUS-DP
Slave n
PROFIBUS-DP
Master
PNOZ m ES PROFIBUS
PSEN Y
Junction
Safety Device
0 V
24 V
FS = Failsafe
PSEN Y
Junction
Safety Device
Safety Device
FE
I1 (FS)
I2 (FS)
Signal inputs and outputs
from other devices
Evaluation device