Building and installing a PilotAware ATOM Station to detect and re-transmit glider and
Mode-S MLAT locations and provide Virtual RADAR SERVER December 2020.
Page 17 of 25
The following data is shown below the Menu.
Version 20200128
. This is the software version currently running. New versions will be
downloaded automatically via the internet.
Date and Time.
Current Date and Time
including server response time.
Station.
The Station name allocated. In this example it is PWWilmcot.
P3I Data.
The number of PilotAware packets received today.
MLAT.
‘
Connected
’
means receiving MLAT data.
Internet.
‘
Connected
’
means connected to the internet.
Line 1 of the matrix shows the test PilotAware unit being received by the ground station
showing that it is receiving data from PilotAware units. Designated as a PilotAware (P) being
picked up locally (l). The altitude shown is the height above sea level and it is GPS (G)
derived data.
On the PilotAware Rosetta RADAR screen the ground station will be shown as active in the
top right hand banner and also in the centre close to the test Rosetta.
Check Reception from The ATOM GRID Ground Station.
