Name
Identifications/References
Qty
Reference
Remark
to P/N
510.10.12.046
Propeller restraint assembly
Part 510.10.12.026
1
Cover assembly, propeller
CSN 10-10-00-01-050
2
Also used as
an alternative
to P/N
510.10.12.026
Cover, protective, AOA sensor
Part 110.88.07.001
AR
Cover assembly, AOA sensor LH CSN 10-10-00-01-015
1
Also used as
an alternative
to P/N
110.88.07.001
Cover assembly, AOA sensor
RH
CSN 10-10-00-01-020
1
Also used as
an alternative
to P/N
110.88.07.001
Cover, pitot tube
Part 510.10.12.017
AR
Cover assembly, pitot tube
CSN 10-10-00-01-025
2
Also used as
an alternative
to P/N
510.10.12.017
Lock pin emergency exit
Part 940.26.81.205
1
Lock pin emergency exit
CSN 10-10-00-01-010
1
Also used as
an alternative
to P/N
940.26.81.205
Hand towbar/Tail stand
CSN 09-10-00-01-020
1
Safety Conditions
CAUTION
IF THE AIRCRAFT IS PARKED FOR A LONG PERIOD OF TIME WITH TEMPERATURES BELOW 0°
C (32° F), APPLY APPROXIMATELY 59 CC (2 OUNCES) OF ISOPROPYL ALCOHOL TO THE OUTER
DIAMETER OF THE BRAKE ASSEMBLY WITH A SPRAY BOTTLE. APPLY THE ALCOHOL WHEN THE
BRAKE ASSEMBLY IS SUFFICIENTLY COOL TO TOUCH BUT BEFORE IT IS COLD.
CAUTION
MAKE SURE THAT THE NOSE WHEEL IS CENTERED AND THE RUDDER IS IN THE NEUTRAL
POSITION.
Note
To identify the AGE and tools used in this procedure, refer to the List of AGE and Tools, TEM
12-B-00-00-00-00A-
060A-A
.
PC-12/47E AMM Doc No 02300, ISSUE 01 REVISION 26 MSN 545, 1001-1719,
1721-1999
12-B-AM-00-00-00-I
UNCLASSIFIED
Effectivity: All
12-B-10-10-00-00A-901A-A
UNCLASSIFIED
2021-12-04 Page 3