Pierce Mid-Mount Ascendant Aerial Tower, Руководство пользователя, Страница: 65 / 132

© 2021 Pierce Manufacturing Inc. All Rights Reserved.
Mid-Mount Ascendant Aerial Tower / 2-23
GENERAL
2-2. Command Zone Information Center (CZIC)
2-2.1 Introduction
The function of the Command Zone Information Center (CZIC) is to communicate information useful for the
operation of your aerial device. Thoroughly read all the information contained in this section of the manual to make
sure you understand the operation of the CZIC before you operate your aerial device. For additional information
concerning the CZIC, refer to the Pierce Custom Chassis Operator’s Manual.
A CZIC is provided at each of the aerial control locations, giving the operator or maintenance technician information
to perform their duties safely and efficiently.
2-2.2 Color Display
Figure 2-22: Command Zone Information Center (CZIC) – Color Display
G0025
2-2.2a Items Common to All Screens
Messages and Faults
If there is a Message or Fault, a triangular “Caution” icon (see left) will appear in the bottom right corner
of the screen. Press the “Caution” icon and it will open the list of Messages and/or Faults that caused
the icon to appear. Follow any instructions on the screen.
Date and Time
The date and time will be displayed in the upper left corner.
Screen Navigation Buttons
Each color display is equipped with five buttons. The function of each button, located along the bottom of the color
display, will change with each screen.
Basic Functions
The HOME button will go to the first common aerial screen.
The WILD CARD button will bring up a list of items for setting up the display or will allow maintenance personnel
familiar with Command Zone electronics to access troubleshooting and analysis screens.