Pierce Mid-Mount Ascendant Aerial Tower, Руководство пользователя, Страница: 107 / 132

© 2021 Pierce Manufacturing Inc. All Rights Reserved.
Mid-Mount Ascendant Aerial Tower / 5-1
SECTION 5 MAINTENANCE
5-1. Maintenance Introduction
This maintenance section provides criteria that must be followed to inspect, maintain, and document the condition
of your aerial device on a regular schedule. This schedule is intended as a minimum and is greatly dependent on
operating conditions. Heavy use and extreme environmental conditions such as heat, cold, sand, or salt spray will
demand increased inspection and maintenance.
This preventive maintenance section is not intended to replace or negate any routine pre-operation safety
inspections. The aerial operator must be aware of the condition of the aerial equipment before operating. A pre-
operational visual safety inspection should always be performed, which may include stabilizers, aerial pivot pins and
retaining hardware, cables, sheaves, basket pivot pins, retaining hardware, and other components.
During the warranty period and thereafter, inspections and maintenance schedules must be performed according to
the specified Pierce Manufacturing Inc. standards.
Failure to comply with these requirements place your operators and emergency victims at risk and will be considered
grounds or conditions that may void the warranty on individual components, assemblies, or the entire Pierce aerial
device.
Read and follow the Perform Maintenance and Service Safely found in the safety section of this manual.