![Pierce HUSKY 12 GPM Скачать руководство пользователя страница 69](http://html.mh-extra.com/html/pierce/husky-12-gpm/husky-12-gpm_operation-and-maintenance-manual_1555697069.webp)
© 2017 Pierce Manufacturing Inc. All Rights Reserved.
Husky 12 Foam System
/ 4-35
MAINTENANCE
4-15. Quarterly Inspection
NOTE:
After every three months of service (quarterly), perform the following maintenance procedure:
4-16. Annual Inspection
NOTE:
Annually, perform the Quarterly inspection, then the following maintenance procedure:
4-17. Recommended Hydraulic Oil for Husky 12 Proportioning System
4-17.1
Characteristics
The system is delivered, charged with ISO 68 hydraulic oil. It is recommended that same or similar oil be used to
maintain optimum efficiency and component life. If the vehicle has been subjected to extreme cold temperatures for
extended periods of time, engaging the water pump will allow the hydraulic oil to warm up before initiating operation
of the Husky 12 system.
4-17.2
Recommendations
U.S. Oil Multi-Vis 68R, Mobil DTE16M ISO 68 or equivalent.
Table
4-5:
Quarterly
Inspection
Item No.
Item to Check/Service
Procedure
1
Foam Strainer
Remove clean-out cap and remove basket. Inspect for foreign debris. If any are found,
clean the basket with water and reinstall.
1073
Table
4-6:
Annual
Inspection
Item No.
Item to Check/Service
Procedure
1
Hydraulic Oil Sample
Obtain an oil sample and compare to previous results. If the current sample matches
previous test results, the oil does not have to be changed. Replace oil and filter if test
results indicate oil degradation.
Foam Strainer
Содержание HUSKY 12 GPM
Страница 2: ......
Страница 6: ...TABLE OF CONTENTS iv Husky 12 Foam System 2017 Pierce Manufacturing Inc All Rights Reserved ...
Страница 8: ...FOREWORD vi Husky 12 Foam System 2017 Pierce Manufacturing Inc All Rights Reserved ...
Страница 34: ...OPERATION 3 12 Husky 12 Foam System 2017 Pierce Manufacturing Inc All Rights Reserved ...