Pierce HUSKY 12 GPM, Руководство по эксплуатации и техническому обслуживанию

Страница: 53 / 76

© 2017 Pierce Manufacturing Inc. All Rights Reserved.
Husky 12 Foam System / 4-19
MAINTENANCE
4-8. Maintenance Mode
4-8.1 Reset Maintenance Reminders / Timers
MODE SELECT → SETUP SELECTION → MAINTENANCE
NOTE: • Maintenance messages flash alternately with main operating screen after 20 hours of foam
system operation.
• Separate screens allow user to reset the counters for strainer and fluid service reminders.
• If these messages occur in the station, have service performed.
• If these messages occur on the scene, verify the hydraulic oil level, continue operation, and
have service performed upon returning to the station.
Figure 4-30: Maintenance Screen Activation
1557E, 1568C, 1581
1. From the normal operation screen (Foam Pump Not Running), navigate to the MAINTENANCE screen.
Figure 4-31: Reset Timers Screen
1581
2. In the MAINTENANCE screen, use the UP/DOWN arrows to select the desired timer to reset (zero out).
3. Press the ENTER button to reset the timer.
4. Use the UP/DOWN arrows to select additional timers to clear.
5. Press ENTER to reset the timer(s).
6. When complete, press PAGE to return to the normal operation screen.
HOLD ENTER AND
PRESS ARROWS PRESS
PAGE HOLD 5
SECONDS SCROLL TO
SETUP
SCROLL TO
SETUP