manualshive.com logo in svg

Pierce Enforcer, Руководство оператора


Поделиться
Скачать
background image

FOREWORD

1-4  /  To the Owner and Operator

© 2018 Pierce Manufacturing Inc. All Rights Reserved.

1-3.

Customer Assistance Information

Your satisfaction with your Pierce apparatus is important to your dealer and Pierce Manufacturing Inc. Normally, any 
question or concern you may have with your apparatus can be handled by your selling or servicing dealer. Your 
dealer has the facility, trained technicians, special tools, and up-to-date information to promptly address any issue 
that may arise. Pierce Manufacturing Inc. has empowered dealers to make decisions and repair vehicles, and they 
are eager to resolve your issues to your complete satisfaction. Should you encounter an issue with your Pierce 
apparatus that requires service, take the following steps:
Step 1.) Contact your authorized Pierce selling or servicing dealer. They will make the necessary arrangements to 
order the necessary parts and make the required repairs.
Step 2.) If they are not able to repair the problem to your satisfaction, discuss your concern with a member of dealer 
management. Normally, concerns can be quickly resolved at that level. If the matter has already been reviewed with 
the Sales, Service, or Parts Manager, contact the owner of the dealership or the General Manager.
Step 3.) If, after contacting a member of the dealership management, it appears your question or concern cannot be 
resolved by the dealership without further help, you may contact Pierce Manufacturing Inc. at 888-Y-PIERCE (888-
974-3723).

1-4.

Responsibility

Study carefully this manual and the manuals for major components such as engine, transmission, and other allied 
equipment. Make sure that all operators and other users also completely understand their contents.
The warnings, cautions, and procedures listed in these manuals must be part of the vehicle’s safety program.

As the operator of this vehicle and equipment, you are responsible for:

•

Understanding the function of each component of the vehicle.

•

Understanding how to adjust each control to obtain the results you want.

•

Maintaining control of the vehicle at all times.

•

Remaining proficient in the use of the vehicle, so at a scene you can operate and make successful changes in 
the operation quickly, without having to read the operator's instructions or safety warning labels.

Practicing proper manual override and emergency shutdown procedures, so you can respond immediately in an 
emergency or during the failure of a component. Remember stress is high. Your failure to practice increases the 
odds you will forget or do it wrong in the heat of the moment.

Содержание Enforcer





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Enforcer

U-Line H-4884 Assembly Instructions Manual preview
H-4884
Бренд: U-Line Страницы: 6
swaploader SL-240 Parts And Operation Manual preview
SL-240
Бренд: swaploader Страницы: 140
Mack TerraPro LEU 2010 Operator'S Handbook Manual preview
TerraPro LEU 2010
Бренд: Mack Страницы: 225
Powerfix PTS 2 A1 Operating Instructions Manual preview
PTS 2 A1
Бренд: Powerfix Страницы: 35
Lionel Husky Stack Owner'S Manual preview
Husky Stack
Бренд: Lionel Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды