Piega SUB MEDIUM, Руководство пользователя

Страница: 8 / 13

User Manual PIEGA Sub Medium // 8
5.4 OUTPUT
This switch exclusively affects the analog signal at the «OUTPUT».
Position «FULL»: Audio signal is transmitted directly from «INPUT» to «OUTPUT».
Position «SAT»: Audio signal is transmitted through a high-pass filter from «INPUT» to «OUTPUT». Set the cut-off frequency of
the high-pass filter by adjusting the «FREQUENCY» knob. The maximum subwoofer frequency thus matches the high-pass filter
cut-off frequency.
5.5 VOLUME
This knob exclusively regulates the subwoofer’s volume.
5.6 FREQUENCY
This knob sets the maximum frequency reproduced by the subwoofer.
You can also use this to adjust the high-pass filter settings of your speaker.
Learn more here:
OUTPUT and SUB MODE ACE WIRELESS SPEAKER
High Pass Filter
ON 0° SAT
PAIR
OFF 180° FULL
0 100 50 160
INPUT OUTPUT SERVICE
AC 100-120/220-240V
~50/60HZ 240W WIRELESS PHASE OUTPUT VOLUME FREQUENCY
INPUT
50 160
FREQUENCY
SAT
FULL
OUTPUT
OUTPUT