User Manual PIEGA Sub Medium //
11
7 RESET
To perform a reset to factory default, use a pointed object to push the «RESET» button. The following settings will be deleted:
WiSA connection (connection to WiSA TV or Tx speaker)
8 FIRMWARE UPDATE
Um ein Firmware-Update auf deinen Lautsprechern durchzuführen, sind folgende Schritte notwendig:
1. Disconnect your speakers from the power supply.
2. Save the new firmware on a USB flash drive.
3. Connect the USB flash drive to the «SERVICE» port.
4. Connect your speakers to power.
5. The «PAIR» indicator lights up, flashing red throughout the entire update.
Note:
Make sure to save the new firmware to the top level of your USB stick and refrain from using subfolders.
ON
0°
SAT
PAIR
OFF
180°
FULL
0
100
50
160
INPUT
OUTPUT
SERVICE
AC 100-120/220-240V
~50/60HZ 240W
WIRELESS PHASE
OUTPUT
VOLUME
FREQUENCY
