manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 95 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 95

Setting the ConÞguration

4-15

To change the current standby timer settings:

1. From the Set General Configuration menu, choose Set Standby 

Timer

.

The following messages appear:

2. Type how many minutes you want to elapse before the system 

goes into standby mode, and then press ENTER.

❑

You can enter from 0 to 99 minutes.

❑

To shut off standby mode, type 0.

Setting the Wireless Keypad Channel

The Concorde¥4500 responds to the wireless keypad through the 
wireless keypad channel. Here are the guidelines for conÞguring 
this channel on the system and on its wireless keypad.

❑

If you are using a single videoconferencing system with one or 
more wireless keypads, leave the systemÕs channel setting at 
the default setting of zero. 

The system will recognize any keypad no matter what its 
channel setting is. However, you can only send signals from one 
keypad to the system at a time.

❑

If you are using multiple videoconferencing systems within 
close proximity, each using a separate keypad, choose a unique 
channel number from one to seven for each Concorde¥4500 
and its keypad.

                             Set Standby Timer

Set standby delay in minutes.
Enter zero to disable standby mode
or press enter for no change.

Current delay: 5 minutes

Enter delay:

_____________________________________________

F Y I 

F.Y.I. 

Channel 0 is the universal channel number; any 
Concorde¥4500 will respond to it.

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов