PictureTel Concorde 4500, Руководство администратора, Страница: 93 / 250

Setting the ConÞguration
4-13
5. Type the new password again, and press ENTER.
You return to the Set Password for Menus screen.
Setting the Near-End Site Name
You can name your site and, when the far-end system is conÞgured
to display site names, display that name on the far-end screen
during point-to-point and multipoint calls.
Choose any name of no more than 16 alphanumeric characters . You
might use your own name or the name of your conference room or
city.
To enter or to change your site name:
1. From the Set General Configuration menu, choose Set Near-End
Site Name .
The following message appears:
F Y I
F.Y.I.
If you have enabled the use of a password (as described in
the previous section), you must now use the
new password
to have changes to the ConÞguration menus take effect or to
use the Diagnostics menus.
F Y I
F.Y.I.
Your site name will appear on the far-end screen only if the
video transmission format for the call is SG3.
T I P
Seeing a site name is particularly helpful in a multipoint call
because all sites can identify each participating site.
Current Site Name: (name)
Enter or change site name? No Yes