manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 45 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 45

Attaching Digital Network Cables

2-5

V.35 Network Interface

The ITU-T V.35 interface operates at data rates that range from 56 
through 768 kbps. An associated RS-366A interface supports 
dialing. Most manufacturers of CSUs provide an RS-366A dialing 
port with the V.35 interface, making the V.35 popular for connecting 
to switched networks.

The Concorde¥4500 conÞgured with a V.35 interface supports ISDN 
terminal adapters, multiplexers, and other network terminating 
equipment, such as modular processor data modules (MPDMs) and 
Northern

 

Telecom DPUs. 

PictureTel provides the RS-366 cables. In addition, PictureTel 
provides two female DC-37 to M-34 adapter cables. The adapter 
cables are connected to the male DC-37 connectors on the electronics 
modules.

You must follow these guidelines when providing the cable:

❑

Use a cable length that does not exceed 100 feet (30.5 meters) 
between the system and the network (with any bit rate).

❑

Use a Belden 9732 (or equivalent) cable.

❑

Provide an M-34 male connector.

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов