Picote Maxi Miller Power+ 18/18
ELECTRICAL REQUIREMENTS—
ELECTRICAL SET UP
Electrical shock can cause serious or fatal injury. Only qualified personnel should install, maintain or troub-
leshoot this equipment. Picote Solutions recommends that a properly trained electrician be available to wire
a power distribution box to whatever power source is available. In the case where a generator is required, a
minimum power requirement of 8 kVA 3 Phase 480 volt is necessary.
The Power Plus has a 3 phase power configuration. It uses a 4 mm
2
/ 10 AWG 4 wire cord (3P + E).
Be sure the system is properly grounded before applying power. Do not apply power before you ensure that
grounds are connected. Electrical shock can cause serious or fatal injury. Follow the National Electrical Code
(NEC) and local codes for the safe installation of the equipment.
Do not operate the
Maxi Miller Power+
until you are sure that you are completely familiar with the safe opera-
tion of the machine, all accessories and safety equipment. Improper use can lead to severe injury. The user ma-
nual defines proper use of this equipment.
Contact Picote Solutions if you do not understand any procedure or operation concerning this equipment or
the user manual.
ELECTRIC DIAGRAM
Picote Solutions Oy Ltd
13
