PICOBREW Z SERIES
| 30
Brewing Coffee
Your Z contains four built-in programs to make coffee: Cold
Brew, Hot Coffee, Hybrid, and Custom. Hybrid is a long cold
brew followed directly by a very short heat up cycle. Custom
allows you to directly set the temperature and time. For each
of these programs, just follow the on-screen instructions.
Make sure your Z is clean to start. Note that you should always
run a clean cycle on your Z when switching from brewing one
beverage type, such as Beer to another, such as Coffee.
01.
From the main menu of your Z, select ‘Coffee’ and then
one of the coffee programs: ‘Cold Brew’, ‘Hot Coffee’,
‘Hybrid’, or ‘Custom’
02.
Set the Batch Size, which is the amount of Coffee you
will be making. As you set the Batch Size, notice that the
display shows the amount of Start Water that will be
required, and the amount of ground Coffee that will be
required for that Batch Size. This is an ideal starting point
for amounts, but feel free to add more or less coffee to
suit your tastes.
03.
For Hot and Hybrid coffee you will be asked to enter an
Intensity value, which correlates to how long it will spend
in the hot cycle.
04.
Note: Brewing Hot Coffee requires an optional Spreader
Lid to ensure uniform distribution of water over the
coffee. This accessory is not required for Cold Brew or
Hybrid coffee.
05.
For Custom coffee you will be asked to directly enter the
Temperature and Time values for a single cycle.
