PicoBox FMGuard FMG-1 Скачать руководство пользователя страница 8

Страница: 8 / 55

8 |

P a g e

•

Very humid or dusty area

•

Locations exposed to direct sunlight

•

Locations exposed to salt spray

•

Close to flammable solvents (alcohol, thinners, etc.)

If any of the following occurs, immediately switch the device OFF, unplug it from the main power
supply and contact your distributor or agent.

•

The device emits any smoke, heat, abnormal noise or unusual odor.

•

A metal obeject falls to the device.

•

The device is damaged in some way.

Do not continue to use the device as this can cause a fire or electric shock.

Please observe the following when using the device. Failure to do so can result in a fire or electric
shock.

•

Do not use flammable sprays near the device.

•

Do not subject the device to strong impact.

Unboxing FMGuard

FMGuard will be delivered to you in an expected package box containing the FMGuard unit,
24VDC adapter and an ethernet cable. Kindly check for damages or make sure that each item
is on your package.

Содержание FMGuard FMG-1
























































Результаты поиска

Содержание FMGuard FMG-1

Отзывы:

Бренды по названию

Популярные бренды

PicoBox FMGuard FMG-1, Руководство пользователя

Результаты поиска

Содержание FMGuard FMG-1

Отзывы:

Бренды по названию

Популярные бренды