46 |
P a g e
CHAPTER 11: SYSTEM CONFIGURATION
This page gives you administrator control over FMGuard.
Device ID
This entry is for the user to assign a unique name to FMGuard device. It accepts up to 15
alphanumeri
c characters. The device’s name will be in SMS notification along with other
information when an alarm is triggered. It is advisable to change the Device ID according to the
location or site name, as the user will know which location the ZSMS alert came from even if
there was a change in the device’s SIM card number.
LAN Configuration
This setting is self-explanatory. Care is to be exercised in setting IP address and subnet mask
values. Incorrect IP address/ subnet mask setting will render FMGuard inaccessible from the
network. Invalid IP/Subnet range will also cause FMGuard inaccessible to the network. FMGuard
do have error tapping and will warn of any invalid settings. If for some reason, the tapping misses
and the invalid values are accepted by th unit and cause network connection difficulties,
contact your distributor or assistance.
