41 |
P a g e
d.
One-Shot
–
The output will immediately turn ON and will turn OFF depending on “X” time
when the logic expression is true. The time will depend on the configured setting.
Remote Control Output using SMS
This feature enables user to switch any of the 4 output ON (contact close), OFF (contact
open) by sending the appropriate ACTION SMS message on FMGuard unit. FMGuard is
non-case sensitive the received action SMS messages. After performing the required
action FMGuard replies to the sender with corresponding reply message.
Another way to control the digital output without going through the SMS is by clicking the
output control section in the Dashboard.
Modbus Discrete Inputs
FMGuard is capable on expanding its monitoring points via RS485 Modbus. Modbus Discrete
Input page will only appear on IO configuration if you add a device capable of sending
discrete inputs on FMGuard and configured it on the modbus configuration page.
Modbus discrete has same settings as digital input except for the triggering delay. Kindly refer to
the Digital Input for more information.
