PICO PicoScope 3204 MSO Скачать руководство пользователя страница 126

Страница: 126 / 144

Prog ramming the 3000A Series oscilloscopes

120

ps3000abpg.en r9

2.15

Driver status codes

Every function in the ps3000a driver returns a

driver status code

from the following

list of

PICO_STATUS

values. These definitions can also be found in the file

picoStatus.h,

which is included in the PicoScope 3000A SDK. Not all codes apply to

the PicoScope 3000A SDK.

Code
(hex)

Symbol and meaning

PICO_OK

The PicoScope is functioning correctly

PICO_MAX_UNITS_OPENED

An attempt has been made to open more than

PS3000A_MAX_UNITS.

PICO_MEMORY_FAIL

Not enough memory could be allocated on the host machine

PICO_NOT_FOUND

No PicoScope could be found

PICO_FW_FAIL

Unable to download firmware

PICO_OPEN_OPERATION_IN_PROGRESS

PICO_OPERATION_FAILED

PICO_NOT_RESPONDING

The PicoScope is not responding to commands from the PC

PICO_CONFIG_FAIL

The configuration information in the PicoScope has become corrupt or is
missing

PICO_KERNEL_DRIVER_TOO_OLD

The

picopp.sys

file is too old to be used with the device driver

PICO_EEPROM_CORRUPT

The EEPROM has become corrupt, so the device will use a default setting

PICO_OS_NOT_SUPPORTED

The operating system on the PC is not supported by this driver

PICO_INVALID_HANDLE

There is no device with the handle value passed

PICO_INVALID_PARAMETER

A parameter value is not valid

PICO_INVALID_TIMEBASE

The timebase is not supported or is invalid

PICO_INVALID_VOLTAGE_RANGE

The voltage range is not supported or is invalid

PICO_INVALID_CHANNEL

The channel number is not valid on this device or no channels have been set

PICO_INVALID_TRIGGER_CHANNEL

The channel set for a trigger is not available on this device

PICO_INVALID_CONDITION_CHANNEL

The channel set for a condition is not available on this device

PICO_NO_SIGNAL_GENERATOR

The device does not have a signal generator

PICO_STREAMING_FAILED

Streaming has failed to start or has stopped without user request

PICO_BLOCK_MODE_FAILED

Block failed to start - a parameter may have been set wrongly

PICO_NULL_PARAMETER

A parameter that was required is

NULL

Содержание PicoScope 3204 MSO













































































































































Результаты поиска

Содержание PicoScope 3204 MSO

Отзывы:

PICO PicoScope 3204 MSO, Руководство программиста, Страница: 126 / 144

Результаты поиска

Содержание PicoScope 3204 MSO

Отзывы: