pico Technology PicoScope 6000A Series, Руководство пользователя

Страница: 11 / 16

PicoScope 6000A/B Series User's Guide 7
Copyright © 2012 Pico Technology Ltd. All rights reserved. ps6000ab.en
3.5
Connections
Standard oscilloscope connectors
The PicoScope 6000 Series oscilloscopes have standard BNC input and output
connectors. The channel inputs have switchable impedances of 50 Ω or 1 MΩ. In
high-impedance mode, they are compatible with all standard scope probes including
10:1 attenuated types. To ensure that you obtain the rated bandwidth from the
scope, we recommend that you use the compensated high-frequency probes supplied
with it.
Connector diagrams
Front panel
PicoScope 6000 Series
A. Input channel A
B. Input channel B
C. Input channel C
D. Input channel D
E. Probe calibration output
F. LED: shows when the oscilloscope is sampling data
Rear panel
PicoScope 6000 Series
G. DC power socket: for use with the AC adaptor supplied with the unit
H. USB 2.0 port: connects to your PC using the Hi-Speed USB cable supplied
I. SIGNAL OUT connector: carries the output of the signal generator and (if present)
arbitrary waveform generator
J. AUX IN connector: carries the auxiliary (AUX) trigger and reference clock inputs
K. Ventilation holes. Do not block the air intake holes or insert any objects
through them, as this could damage the unit and cause injury.