manualshive.com logo in svg

pico Technology PicoScope 3425, Руководство пользователя

Поделиться
Скачать
pico Technology PicoScope 3425 Скачать руководство пользователя страница 48

PicoScope 3425 PC Oscilloscope

44

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

3.2.8.24 ps3000_get_streaming_values

unsigned long ps3000_get_streaming_values (

short           handle,
double        * start_time,
short         * pbuffer_a_max,
short         * pbuffer_a_min,
short         * pbuffer_b_max,
short         * pbuffer_b_min,
short         * pbuffer_c_max,
short         * pbuffer_c_min,
short         * pbuffer_d_max,
short         * pbuffer_d_min,
short         * overflow,
unsigned long * triggerAt,
short         * triggered,
unsigned long no_of_values,
unsigned long noOfSamplesPerAggregate )

This function is used after the driver has finished collecting data in 

fast streaming

mode.

  It allows you to retrieve data with different  

aggregation

ratios, and thus

zoom in to and out of any region of the data.

Before calling this function, first capture some data in fast streaming mode, stop fast
streaming by calling 

ps3000_stop(),

 then allocate sufficient buffer space to receive

the requested data.  The function will store the data in your buffer with values in the
range 

PS3000_MIN_VALUE

 to 

PS3000_MAX_VALUE

.  The special value

PS3000_LOST_DATA

 is stored in the buffer when data could not be collected because

of a buffer overrun.  (See 

Scaling

 for more on data values.)

Each sample of aggregated data is created by processing a block of raw samples.  The
aggregated sample is stored as a pair of values: the minimum and the maximum
values of the block of raw samples.

15

56

38

16

Содержание PicoScope 3425





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды