Pickering PXI 40-510 Скачать руководство пользователя страница 33

Страница: 33 / 38

Page 7.1

MATRIX MODULE 40-510/511/512/513

pickering

SECTION 7 - MAINTENANCE INFORMATION

Note: Module versions -022 utilise double pole relays in the relay positions shown in the tables. See Section 1.

Page 7.1

REED RELAY MODULE 40-110/115/120/125

pickering

SECTION 7 - MAINTENANCE INFORMATION

GENERAL CLEANING

•

Isolate the electrical power from the chassis and ensure that no user I/O signals are being applied.

•

Wipe the product & chassis surfaces with a clean dry anti-static cloth only.

SOFTWARE UPDATE

For PXI modules operating in a PXI chassis, no module software updates are required. For the latest version

of the driver please refer to our web site

pickering

test

.com

where links to our Software Download page will

provide the latest version of the driver software for the various programming environments encountered.
For PXI modules which are supported in one of Pickering Interfaces’ Modular LXI Chassis (such as the 60-102B

and 60-103B) no module software update is required. If the module was introduced after the LXI chassis was

manufactured the module may not be recognized, in this case the chassis firmware may need upgrading. This

is a simple process which is described in the manual for the Modular LXI Chassis.

SWITCHING SYSTEM TEST TOOLS

We recommend the use of

BIRST

to provide a check of the correct operation of relays and to identify the

location of any faulty relay. For more information on

BIRST

click

here

SECTION 7 - MAINTENANCE INFORMATION

PERIODIC MAINTENANCE

This product and its corresponding chassis do not require any periodic maintenance.

Refer to the Warnings and Cautions at the front of this manual

RELAY LOOK-UP TABLES

The following pages provide a cross reference between the signal paths of the product and the physical relays

on the PCB. The tables can be used in the fault finding process and should be used in conjunction with the

corresponding PCB layout diagrams to identify the position of faulty relays. Users of

BIRST

switching system

test tools do not need to use this information to locate faulty relays.

Содержание PXI 40-510







































Результаты поиска

Содержание PXI 40-510

Отзывы:

Похожие инструкции для PXI 40-510

Бренды по названию

Популярные бренды

Pickering PXI 40-510, Руководство пользователя

Результаты поиска

Содержание PXI 40-510

Отзывы:

Похожие инструкции для PXI 40-510

Бренды по названию

Популярные бренды