OPERATING AND INSTALLATION INSTRUCTIONS LBE 250A / LBE 500A
PAGE 24
USER
GENERAL
SPECIALIS
T PERSONNEL
When you press the arrow button
, the unit settings are shown.
Note!
The air humidification unit is pre-parameterised correctly by the factory. A selection of the unit type (LBE 250A / LBE
500A) and of the type of heater battery (electric / hot water) is only to be carried out when the control panel is replaced.
9.8 Test mode
In the “Factory test” menu item, the various electrical components can be checked with regard to their operability. For this purpose,
the LBE must first be in the “Off” operating status, then the test mode can be activated.
The components can be switched active by selec-
tion for a period of max. 10 seconds. By pressing
the button again, operation can be stopped again
immediately.
To exit the test mode, it has to be deactivated
again first.
