manualshive.com logo in svg

PICASO 3D Designer X, Руководство пользователя

Поделиться
Скачать
PICASO 3D Designer X Скачать руководство пользователя страница 67

QUESTIONS AND ANSWERS

66

What printer parts are consumable?

What type of USB drives can I use?

Why are magnets of different sizes?

Why do I need to  calibrate the cleaning system?

Why does Designer XL often pause for a short time?

Nozzles, silicone cleaner, glass, and filament feed tube.

Drives with the FAT32 file system. Recommended size: up to 16 GB.

This is done for an easier and better fixation of the glass on the platform. The large magnet 

is centering; it provides the correct position of the glass on the platform. The small ones 

are fixing; they hold the glass.

While 

calibrating the cleaning system

, Designer XL remembers the position above the 

cleaner, relative to which the working area of the 3D printer is built up. Before printing a 

model, short cleaning is performed to maintain the layer surface quality and the outer shell 
of the model.

This usually happens when printing small models. The print status bar displays «Pause» 

with a countdown to the operation completion to maintain surface quality, as the material 

needs some time to cool. This algorithm is associated with the material profile parameter. 
«Minimum layer time». If you reduce this parameter, there is a risk of surface defects on the 

model due to overheating.

The operation of the filament flow control system is similar. If the system detects  deviation 
from the stable flow, Designer XL starts the flow channel cleaning algorithm: the printhead 
is pulled away from the model, and the extruder feeds some filament for cleaning. If it’s 
not possible to restore the flow during the first cleaning, the algorithm starts again with 
increased temperature. If the flow is not restored in three iterations, Designer XL pauses 

printing until user’s intervention.

To avoid such pauses, several models can be printed at once to increase the total layer 
time.

If the filament flow control system often detects errors in the filament flow, pay attention 
to the profile settings and the quality of the filament used.

Содержание Designer X





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды