background image

to an 

Authorised Service Centre or Dealer.

 The replacement of a tyre involves re-

moving the wheel in question. Take your vehicle to an 

Authorised Service Centre

or Dealer

 for these operations.

CAUTION

TO USE THE "INFLATE AND REPAIR" SPRAY CAN PROPERLY, FOLLOW THE
INSTRUCTIONS ON THE PACKAGING.

WARNING

THE WHEELS FITTED WITH TYRES SHOULD ALWAYS BE BALANCED. RIDING
THE VEHICLE WITH VERY LOW TYRE PRESSURE OR WITH INCORRECTLY
BALANCED TYRES CAN LEAD TO DANGEROUS STEERING VIBRATIONS.

03_41

delveicolo (03_41)

We recommend carrying out the following operations:

1

. Clean the scooter thoroughly and then cover it with a canvas;

2

. With engine off and piston at the bottom dead centre, remove the spark plug, add

1÷2 cm³ of oil through its hole (larger amounts are dangerous for the engine itself).
Operate the starter button 1-2 times for roughly 1 second to turn the engine over
slowly, then insert the spark plug again;

3

. Drain all the fuel from the scooter; spread antirust grease on the uncoated metal

parts; keep the wheels lifted above the ground by resting the chassis on two wooden
wedges;

4

. As regards the battery, follow the instructions in the «Battery» section.

68

3 Maintenance

Содержание X8 125

























































































Отзывы: