PIAGGIO MP3 300 hpe 2020, Руководство пользователя, Страница: 95 / 128

03_43
- For the high beam light bulb, turn the bulb holder anticlockwise and take it off, then
detach the bulb.
WARNING
HIGH- AND LOW-BEAM BULBS ARE HALOGEN TYPE: DO NOT TOUCH THEM
WITH YOUR FINGERS TO AVOID DAMAGING THEIR FUNCTION.
03_44
03_45
Head light adjustment (03_44, 03_45)
Proceed as follows:
1. Position the unloaded vehicle, in running order and with the tyres inflated to the
prescribed pressure, onto a flat surface, 10 m away from a half-lit white screen; make
sure the vehicle axis is perpendicular to the screen;
2. Remove the central cover from the light assembly
3. Turn on the headlight and make sure that the upper edge of the beam projected on
the screen is not more than 9/10 of the height from the ground of the centre of the light
and is not less than 7/10;
4. If the aforementioned condition is not met, adjust the headlight with the screws
«A» indicated in the figure
N.B.
THE PROCEDURE DESCRIBED IS THAT ESTABLISHED BY EUROPEAN STAND-
ARDS FOR THE MAXIMUM AND MINIMUM HEIGHT OF THE LIGHT BEAM. RE-
FER TO THE STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
95
3 Maintenance